In Integration Configuration, you select and configure VR and third party integration, including Verba, Textbook, SciQuest, and Access Codes (eBook).
VR
Configuration Setting
Description
Re-publish GM Products
Normally, the VR integration will only mark a GM product as Unpublished
based on a change in the Available Online, but it will not re-publish
the product if Available Online changes to Y. Enable this AppConfig to
change this behavior so that the integration will re-publish GM
products.
Re-publish TR Products
Normally, the VR integration will only mark a TR product as Unpublished
based on a change in the Available Online, but it will not re-publish
the product if Available Online changes to Y. Enable this AppConfig to
change this behavior so that the integration will re-publish TR
products.
Use Single Rental Variant
Enable this to use the older-style single rental variant logic when
sending orders to VR. Enabling this is required for VR releases prior
to 19.2, but it should be disabled for VR versions 19.2 or later.
Reset Default Variant
Enable this to reset the default variant for a product based on the
display order specified for the variants. The published variant with
the lowest display order will always be set as the default variant.
Create Manufacturers as Unpublished
Enable this to set new Manufacturers as Unpublished when they are first created by the VR integration.
Related Parameters
Parameter
Description
RATEX.Integration.ACI.Disabled
Set to true to disable the
Access Code Integration (ACI), which will cause acifeed.aspx to return no
data.
RATEX.Integration.Textbook.Disabled
Set to true to disable the
generic Textbook integration service
RATEX.Integration.Textbook.DisplayRentals
Enable this to send rentals to
the generic Textbook Integration consumer, even if rentals are disabled using
the RATEX.TextbookRental.Disable AppConfig. This is useful if you don't want
customers to be able to purchase rentals online but still would like to show
that they are available in the store.
RATEX.Integration.Textbook.Logging.Enabled
Set to true to enable logging
for the operations listed in
RATEX.Integration.Textboook.Logging.OperationList
RATEX.Integration.Textbook.Logging.InputLogPath
Set to the physical path on the
server where log files for data beign sent to eRATEX from the generic
Textbook Integration consumer should be stored. {0} will be replaced with the
LogDate.
RATEX.Integration.Textbook.Logging.OperationList
Select the generic Textbook
Integration operations to log.
RATEX.Integration.Textbook.Logging.OutputLogPath
Set to the physical path on the
server where log files for data being sent from eRATEX to the generic
Textbook Integration consumer should be stored. {0} will be replaced with the
LogDate.
Enable this to set new
Manufacturers as Unpublished when they are first created by the VR
integration.
RATEX.Integration.VR.Logging.Enabled
Set to true to enable logging
for the operations listed in RATEX.Integration.VR.Logging.OperationList
RATEX.Integration.VR.Logging.InputLogPath
Set to the physical path on the
server where log files for data being sent to eRATEX from VR should be
stored. {0} will be replaced with the LogDate.
RATEX.Integration.VR.Logging.OperationList
Select the VR Integration
operations to log. GetNewOrders, GetNewOrdersDefaultCount, and GetAdoptions
will not log input, and will only log output if there is output to send. All
other operations will log both input and output.
RATEX.Integration.VR.Logging.OutputLogPath
Set to the physical path on the
server where log files for data being sent from eRATEX to VR should be
stored. {0} will be replaced with the LogDate.
RATEX.Integration.VR.RepublishGMProducts
Normally, the VR integration
will only mark a GM product as Unpublished based on a change in the Available
Online, but it will not re-publish the product if Available Online changes to
Y. Enable this AppConfig to change this behavior so that the integration will
re-publish GM products.
RATEX.Integration.VR.RepublishTRProducts
Normally, the VR integration
will only mark a TR product as Unpublished based on a change in the Available
Online, but it will not re-publish the product if Available Online changes to
Y. Enable this AppConfig to change this behavior so that the integration will
re-publish TR products.
RATEX.Integration.VR.ResetDefaultVariant
Enable this to reset the default
variant for a product based on the display order specified for the variants.
The published variant with the lowest display order will always be set as the
default variant.
RATEX.Integration.VR.UseSingleRentalVariant
Enable this to use the
older-style single rental variant logic when sending orders to VR. Enabling
this is required for VR releases prior to 19.2, but it should be disabled for
VR versions 19.2 or later.
Verba
Setting
Description
Display Rentals
Enable this to display rentals in Verba, even if rentals are disabled
using the RATEX.TextbookRental.Disable AppConfig. This is useful if you
don't want customers to be able to purchase rentals online but still
would like to show that they are available in the store.
Related Parameters
Parameter
Description
RATEX.Integration.Verba.Disabled
Set to true to disable the Verba
Integration, which will cause verba.asmx to return no data.
RATEX.Integration.Verba.DisplayRentals
Enable this to display rentals
in Verba, even if rentals are disabled using the RATEX.TextbookRental.Disable
AppConfig. This is useful if you don't want customers to be able to purchase
rentals online but still would like to show that they are available in the
store.
RATEX.Integration.Verba.Logging.Enabled
Set to true to enable logging
for the operations listed in RATEX.Integration.Verba.Logging.OperationList
RATEX.Integration.Verba.Logging.InputLogPath
Set to the physical path on the
server where log files for data beign sent to eRATEX from Verba should be
stored. {0} will be replaced with the LogDate.
RATEX.Integration.Verba.Logging.OperationList
Select the Verba Integration
operations to log.
RATEX.Integration.Verba.Logging.OutputLogPath
Set to the physical path on the
server where log files for data beign sent from eRATEX to Verba should be
stored. {0} will be replaced with the LogDate.
Textbook
Setting
Description
Display Rentals
Enable this to send rentals to the generic Textbook Integration
consumer, even if rentals are disabled using the
RATEX.TextbookRental.Disable AppConfig. This is useful if you don't
want customers to be able to purchase rentals online but still would
like to show that they are available in the store.
Access Codes
Originally designed for use with the Access Code service for Campus
eBookstore, this provides a CSV-formatted list of course and textbook
data.
Email This Article
Previous Article
Next Article